Siebel Server administration -- good guide from Aasif Faheem Ansari Command Line Parameter for Siebel. Locate the dbisqlc.exe utility under the Siebel Thick Client Installation directory BIN folder. Siebel Server administration -- good guide.

Siebel Web Client Administration Guide > Installing Mobile and Dedicated Web Clients >

Installing the Siebel Mobile and Dedicated Web Client

This section describes how to install the Siebel Mobile and Dedicated Web Client.

NOTE: This book assumes that installations are performed by administrators, not end users.

The software installed on the user's machine for Siebel Mobile Web Client and Dedicated Web Client is identical. Therefore, a single installer provides the software necessary to run either type of client. For more information, see Siebel Mobile and Dedicated Web Clients.

The standard Siebel Mobile and Dedicated Web Client installer performs the following:

  • Checks the client computer to verify whether required components have already been installed.
  • Checks the client computer to verify installation of the proper version of Microsoft Data Access Components (MDAC) components.
  • Installs Siebel client software and allows the installation log file to be viewed.

Before you begin installation, see System Requirements and Supported Platforms.

Kaizoku sentai gokaiger episode 41. Nov 27, 2016 - Kaizoku Sentai Gokaiger Episode 01-51 [END] Subtitle Indonesia. Synonyms: Kaizoku Sentai Gōkaijā ☆ Japanese: 海賊戦隊. Download All Episode Episode 01. Kyukyu Sentai GoGoFive Episode 01-09 Subtitle Indo. Aug 9, 2014 - Kaizoku Sentai Gokaiger 720p Episode 1 – 51 [END] Sub Indo. In Gokaiger - on. Monggo di DOWNLOAD. Link Download. Link Download Kaizoku Sentai Gokaiger Episode 47 Subtitle Indonesia. Translator 'kak Tanda Tangan Dosen. Encoder & Uploader 'kak Rofani. SD: Tusfiles.

NOTE: Each Siebel client is designed to support only a single Siebel Enterprise. To support multiple Enterprises on a single machine for testing purposes, be sure to install clients in separate directories. For more information, see Directory Names.

To install the Siebel Mobile or Dedicated Web Client software

  1. Using Windows Explorer, navigate to the root directory of the Siebel eBusiness Applications Web Client ProgramsCD-ROM, then navigate to the seaw folder. Use the version of this CD-ROM that includes the languages you need.
  2. CAUTION: You must run this and other installation programs from the CD-ROM or a network drive mapped to a drive letter. If you attempt to install from an unmapped network drive, the installer may be unable to locate files it needs to proceed and may fail.

  3. Double-click install.exe to start the Siebel client installer.
  4. From the Choose Setup Language screen, choose the language in which to conduct the installation, then click OK.
  5. The default installation language is the one that corresponds to the current regional settings on the installation machine.

  6. If you have an existing client installation, you can choose to add language packs to this installation.
    • If you are installing a new instance of the Siebel client, click Next, then go to Step 5.
      • Click in the check box next to the line identifying the installation, then click Next.
      • Click in the check box next to each language you are installing, then click Next.
      • The setup program copies language pack files to the local host machine's hard disk, and then exits. Skip the rest of this procedure.

  7. In the Setup Type screen, select the type of installation to perform. All options install a common set of components. The Custom option lets you specify which optional components to install. Typical and Compact options install subsets of the optional components.
    • Typical. Installs all base Siebel client components, plus the following optional components: First Logic Configuration Files, Packager Utility, Siebel Charts, Siebel Debug Symbols. This option is recommended for most users.
    • Compact. Installs all base Siebel client components, plus the following optional component: Siebel Charts. Select this option for an installation with minimum storage requirements.
    • Custom. Installs all base Siebel client components and lets you specify whether to install the following optional components: Server Manager, First Logic Configuration Files, Packager Utility, Siebel Charts, ODBC Driver for External Oracle Database, and Siebel Debug Symbols. Some of these options are preselected by default.
    • NOTE: Siebel administrators should use the Custom setup option and make sure to install the Server Manager and the Packager utility.

  8. While still in the Setup Type screen, verify that the Siebel client installation directory listed is correct. The default directory is C:sea7xxclient.
    • Click Browse to select a different destination directory.
    • For details on pathname requirements, see Directory Names.

      If you are performing a:

    • Custom installation, go to Step 8.
  9. For a custom installation, select from the Select Components screen the optional components you want to install. This screen appears only if you chose Custom installation in Step 6 above.
  10. In the Choose Languages screen, select the languages to install. The language in which you are performing the installation, specified in Step 3, is preselected as a default.
  11. Verify that your destination machine has sufficient disk space for the installation, then click Next.

    NOTE: The installer displays space requirements for only one drive. The drive that contains the TEMP directory requires at least 10 MB free prior to installation. Also, pay attention to your hard drive file system configuration. Using a FAT configuration with a 64-KB allocation unit is not recommended, since this may leave insufficient space for installation of all necessary components and cause the installation to fail.

  12. In the Select Client Type screen, specify if you are installing the Mobile Web Client or the Dedicated Web Client, then click Next.
  13. NOTE: Some of the remaining installation steps in this procedure apply only if you are installing Mobile Web Client, or only if you are installing Dedicated Web Client.

    For Mobile Web Client installations, go to Step 12.

  14. Dedicated Web Client installations only: In the Server Database screen, select the type of server database on which you are implementing your Siebel application. Choose one of the following, then click Next:
    • IBM DB2 Universal Database 7.2 (for Windows and UNIX)
    • Oracle Database
    • Based on your choice, the Siebel client installer validates that the correct database connectivity software has been installed.

      NOTE: For IBM DB2 Universal Database for OS/390 and z/OS, see Implementing Siebel eBusiness Applications on DB2 UDB for OS/390 and z/OS.

  15. In the first Server Locations screen, enter your Siebel File System server connectivity information, then click Next.
  16. NOTE: Siebel File System connectivity information can be the UNC share name of the Siebel File System directory (for example, SRV1siebfile), or a drive letter mapped to the Siebel File System directory (for example, K:).

  17. In the second Server Locations screen, enter your Siebel Remote Server connectivity information, then click Next.
  18. Setup factory 9.5 serial. For Mobile Web Client installations, go to Step 15.

  19. Dedicated Web Client installations only: In the Database Identification screen, enter the following information. Specify information for the database you specified in the Server Database screen in Step 11:
    • For IBM DB2 Universal Database for Windows and UNIX, specify the Database Alias and Table Owner, then click Next.
    • For Microsoft SQL Server, specify the Server Name and Database Name, then click Next.
    • For Oracle Database, specify the Database Alias and Table Owner, then click Next.
    • NOTE: For IBM DB2 Universal Database for OS/390 and z/OS, see Implementing Siebel eBusiness Applications on DB2 UDB for OS/390 and z/OS.

      Go to Step 16.

  20. Mobile Web Client installations only: In the Enterprise Server Information screen, specify the address of the Siebel Gateway (Gateway Server) and the name of the Enterprise Server, then click Next.
  21. NOTE: The Siebel Gateway address is typically the machine name or VIP where the Siebel Gateway is running.

    Go to Step 17.

  22. Dedicated Web Client installations only: In the Enterprise Server Information screen, specify the Gateway Server Address (for Siebel Gateway) and Enterprise Server to which this client will connect for administration.
  23. The address specified for the Siebel Gateway varies depending on whether your Siebel Servers are using Resonate Central Dispatch to support connection brokering:

    • If you are using Resonate Central Dispatch, the Siebel Gateway address is the Gateway VIP (virtual IP address) of the machine on which the Siebel Gateway is installed.
    • If you are not using Resonate Central Dispatch, enter the network name or the IP address of the machine on which the Siebel Gateway is installed.
    • To enter a specific port number, append the Gateway Server string with a colon and the desired port number.

      The Enterprise Server name is the name under which the Siebel Servers that support this client's server database were installed.

  24. In the Server Request Information screen, specify the name of the Siebel Server on which the Server Request Broker component is operating. This component is used for dynamic assignment and other interactive operations. Then click Next.
  25. NOTE: If you are using Resonate Central Dispatch to load balance server requests, leave this field blank. If you are not using Resonate Central Dispatch to load balance server requests, you must specify the Siebel Server name for server requests.

    • If you will use Siebel Search, enter the following for the server on which Siebel Search is operating:
      • Port Number
    • If you will not use Siebel Search, accept the default parameters, then click Next.
    • NOTE: For system requirements and other information on implementing Siebel Search, consult Siebel Search Administration Guide.

  26. In the Select Program Folder screen, enter the name of the program folder that will contain your Siebel shortcuts, then click Next.
  27. The default name is Siebel Client 7.x.x. You can use spaces and the backslash () in folder names to create a folder hierarchy.

    CAUTION: If you are deploying clients operating against an Oracle database, do not include parentheses in the labels of the Siebel shortcuts if you modify them. Including parentheses prevents the application from connecting to the Oracle database.

    The setup program copies files to the local host machine's hard disk. A status bar in the Setup Status dialog box indicates the progress of the installation. A separate set of files is installed for each language specified in Step 9, in addition to those installed for the base installation.

    This log provides details of the steps the installer has performed during your Siebel client installation.

  28. Review the Registry Log screen, then click Next.
  29. This log provides details of the registry information the installer has performed during your Siebel client installation.

    Running man eng sub all episode. Nov 9, 2015 - Anohana – Episode 01-11 [480p][720p][Complete] - Over Encoded Anime. English: anohana: The Flower We Saw That Day.

  30. Click Finish in the InstallShield Wizard Complete screen.
  31. The Siebel client installation is now finished. Siebel application shortcuts are created in the program folder specified in Step 19. For more information, see Siebel Client Shortcuts.

  32. Review the installation log to verify that all components installed successfully.
  33. To verify successful installation, see After Installing.

Siebel Web Client Administration Guide >

Configuring and Using Mobile Web Client

Solidworks Installation And Administration Guide

This chapter provides instructions for:

  • Configuring the Mobile Web Client and connecting to the Siebel Remote Server
  • Synchronizing using Siebel Remote
  • Using the Siebel QuickStart agent with the Mobile Web Client

For more information about Siebel Remote and about extracting local databases for mobile users, see Siebel Remote and Replication Manager Administration Guide. See also System Requirements and Supported Platforms.

Setting Up and Connecting to the Siebel Remote Server

The Siebel Remote Server runs the Siebel Remote components and manages synchronization sessions with Mobile Web Clients. The Siebel Remote Server provides an interim storage area for data required to synchronize the mobile databases with the Siebel Database.

Administration

Siebel Remote clients must be able to connect to the Siebel Remote Server using TCP/IP. Verify that the correct hardware and software is installed on each client machine and that TCP/IP connectivity to the Siebel Remote Server is established.

Mobile Web Client Configuration Parameters

The Siebel Remote client reads parameters in the Siebel configuration file, such as siebel.cfg for Siebel Sales, to specify the location of the Siebel Server directories, Siebel File Server directories, and the Siebel Database installation. Before using Siebel Remote, you must set the values for the configuration parameters.

For more information on configuration parameters, see Configuration Parameters.

For information on event logging, see Siebel Server Administration Guide.

Siebel Client Installation And Administration Guide Version 8.1

Set the following parameters in the [Siebel] section of the configuration file:

  • ClientRootDir. Name of the Siebel client installation directory.
  • DockRepositoryName. Name of the Siebel Repository that you are currently using. This parameter must have the same value as the Siebel Server repository.

Set the following parameters in the [Local] section of the configuration file:

  • DockConnString. Logical network address of the Siebel Server to which you want to connect for synchronization.
  • It is recommended that every synchronization session occur within the corporate firewall. If your deployment must support synchronization through the Internet from outside the firewall, VPN is a good alternative. If this is the environment you are using, then the port for synchronizing with your server must be opened on your firewall. Also make sure your Internet service provider (ISP) does not block communication to this particular port.

    This parameter has the following format:

    siebel_server_name:network_protocol:sync_port_#:
    service:encryption:compression

    where:

    • siebel_server_name = The logical network address of the Siebel Server to which you want to connect for synchronization.
    • network_protocol = The name of the networking protocol to use. TCPIP is the only valid value and is the default value if nothing is specified.
    • sync_port_# = The TCP/IP port number dedicated to the Synchronization Manager. The default value is 40400 if nothing is specified.
    • NOTE: You can use the Server Administration screen to override the default value. To do this, specify a value for the Synchronization Manager (SynchMgr) component's SyncPort parameter, and restart the Siebel Server. You can also specify this port number as a command-line option when starting the Siebel Server. If you change this value, also update the configuration file on the client so it matches the server settings.

    • service = The TCP/IP service you are requesting. SMI is the only valid value and is the default value if nothing is specified.
    • encryption = The encryption package you are using. The encryption facility must match the type used by the server. Both MSCrypto and RSA are supported.
    • All elements except the Siebel Server name are optional. If an item between other items is omitted, adjacent colons must be retained—as in the third example below, which omits the network protocol element. Examples of valid values for DockConnString are:

      • SIEBAPP1:TCPIP:9000
      • SIEBAPP1:TCPIP:40400:SMI:RSA
  • DockTxnsPerCommit. Number of transactions that Siebel Remote applies to the local database before performing a commit. You should set this parameter to a value that satisfies the needs at your site. The default is 500.
    • If you are using the Siebel Mobile Web Client to dock, set DockTxnsPerCommit to a high value. Merged transactions will not lock out other users. This enhances the performance of Siebel Remote.
    • If you are using the stand-alone synchronizer, set DockTxnsPerCommit to a high value only if the program will be the only active user on the database. If the program will apply transactions while the user is accessing the database through the application, set a low value to prevent locking out other users while merging transactions.
  • TableOwner. Name of the database account on the local database where the Siebel schema is installed. Default is SIEBEL.